Baseball Display

A starter ESP32 firmware project for a baseball scoreboard with a seven-segment-style LED display built from WS2811/SK6812-compatible LEDs.

Features

• Displays home score, away score, inning, outs, balls, strikes, current time, and elapsed game time
• Serves a small web control page from the ESP32 for remote updates
• Uses a configurable LED strip / pixel array as the display backend

Hardware

• ESP32 development board
• WS2811/SK6812-compatible LED strip or pixels
• Data pin: GPIO 13
• Power: 5 V, with ground connected and a bulk capacitor near the LEDs

Build

pio run

Flash

pio run --target upload

Usage

1. Flash the firmware to the ESP32.
2. Connect to the Wi-Fi access point named BaseballDisplay with password scoreboard.
3. Open http://192.168.4.1/ in a browser.
4. Use the controls to update the scoreboard state.

Next steps

• Replace the simple segment layout with your actual physical LED geometry.
• Add a real controller device or a more polished UI.
• Integrate real time sync or a scoreboard backend.